BLOGS

Learn from BAIR.

FTIR Manual Data Validation

Stack Testing
November 01, 20222 min read

Work smart, stay informed, never give up, and great things will happen.- Ziad K. Abdelnour

FTIR Manual Data Validation

If you own, operate, or are involved in stack/emission testing on natural gas compression sources where FTIR analyzers and methods are used, this webinar is for you!

EPA Codes

Staying in the "Know"

As a follow up to our 4C HSE Conference Webinar Series presentation in November 2020, we will focus in on ASTM D6348 and the 8 Annexes within the method and what the EPA and state agencies are discussing regarding test report submittals. Our hope is to bring a better understanding of the method data quality objectives and to assist you in achieving your compliance goals! 

We’d like to quickly tell you about one of the ways a FTIR Manual Data Validation can appear to one of your technicians. 

Using your FTIR software utility, load a spectral file for manual analysis. Afterwards, select compounds of interest and manually scale for each target analyte in your test plan. Next, compare final analyte values of the manual analysis to ensure that they are within 20% of the values measured during field sampling. 

If you found this information helpful and would like to learn more, please register for FREE on the 4C HSE website link below.

This information is just another way we here at BAIR want to ensure your code compliance is taken care of. With our team, we will always be sure to keep you up to date on the late code changes or compliance requirements!

Check out the Webinar on the 4C website: https://bit.ly/2LwzaBv or on the 4C youtube: https://bit.ly/3a8zOP6

At BAIR we are seeking to transform and evolve the world of emissions testing to ensure a cleaner solution that you not only have to do once, but do RIGHT. We supply next level full service testing for natural gas emissions and air particulates. Whether it's a compressor engine, turbine, generator, industrial heater or boiler, thermal oxidizer, or any other source that combusts natural gas, BAIR’s experienced analytical team is prepared to assist you tune your source, gather data for engineering studies, and/or perform testing to comply with state or federal regulations with the highest standards towards quality assurance.


Footer

Randy Bartley

CEO at BAIR, the Leader in Gas Compression Stack Testing Services! BAIR is outpacing other Stack Testing Firms, capitalizing on mobilization efficiencies, using the newest technologies to deliver the most accurate measurements with full adherence to EPA approved methods. NEVER WORRY ABOUT STACK TESTING COMPLIANCE AGAIN!

Back to Blog

BLOGS

Learn from BAIR.

FTIR Manual Data Validation

Stack Testing
November 01, 20222 min read

Work smart, stay informed, never give up, and great things will happen.- Ziad K. Abdelnour

FTIR Manual Data Validation

If you own, operate, or are involved in stack/emission testing on natural gas compression sources where FTIR analyzers and methods are used, this webinar is for you!

EPA Codes

Staying in the "Know"

As a follow up to our 4C HSE Conference Webinar Series presentation in November 2020, we will focus in on ASTM D6348 and the 8 Annexes within the method and what the EPA and state agencies are discussing regarding test report submittals. Our hope is to bring a better understanding of the method data quality objectives and to assist you in achieving your compliance goals! 

We’d like to quickly tell you about one of the ways a FTIR Manual Data Validation can appear to one of your technicians. 

Using your FTIR software utility, load a spectral file for manual analysis. Afterwards, select compounds of interest and manually scale for each target analyte in your test plan. Next, compare final analyte values of the manual analysis to ensure that they are within 20% of the values measured during field sampling. 

If you found this information helpful and would like to learn more, please register for FREE on the 4C HSE website link below.

This information is just another way we here at BAIR want to ensure your code compliance is taken care of. With our team, we will always be sure to keep you up to date on the late code changes or compliance requirements!

Check out the Webinar on the 4C website: https://bit.ly/2LwzaBv or on the 4C youtube: https://bit.ly/3a8zOP6

At BAIR we are seeking to transform and evolve the world of emissions testing to ensure a cleaner solution that you not only have to do once, but do RIGHT. We supply next level full service testing for natural gas emissions and air particulates. Whether it's a compressor engine, turbine, generator, industrial heater or boiler, thermal oxidizer, or any other source that combusts natural gas, BAIR’s experienced analytical team is prepared to assist you tune your source, gather data for engineering studies, and/or perform testing to comply with state or federal regulations with the highest standards towards quality assurance.


Footer

Randy Bartley

CEO at BAIR, the Leader in Gas Compression Stack Testing Services! BAIR is outpacing other Stack Testing Firms, capitalizing on mobilization efficiencies, using the newest technologies to deliver the most accurate measurements with full adherence to EPA approved methods. NEVER WORRY ABOUT STACK TESTING COMPLIANCE AGAIN!

Back to Blog

Need Thorough & High Quality Testing?

Ask BAIR

Contact Info

817.439.4767

© 2022 BAIR